How to Level Mower Deck John Deere x300

Fact Checked By
As an Amazon Associate I earn from qualifying purchases.

John Deere x300 series lawn mowers are designed for superior performance and have even grass cutting capability. If the mower deck is not leveled properly, the lawnmower cannot cut grass evenly. So the lawn will not look eye-catchy at all, and it will lose its beauty over time.

Uneven decks can also form ridges making the lawn look even worse. To make the lawn look beautiful again, you must level the mower deck. The process is pretty simple and takes very little time to complete. Today we will learn how to level mower deck John Deere x300.

Let’s begin.

Things you’ll need

Things to Do Before Leveling The Mower Deck

Before you start the process of leveling the mower deck, several things need to be done. These are

  1. Park the lawnmower on a flat and even surface. The flat surface will assist you in leveling the mower deck perfectly.
  2. Turn of the engine. To turn it off, you can simply remove the key of the mower from the ignition switch, and the engine will shut off.
  3. You have to make the mower steady. To do so, press the park brakes, and the mower will not move from its place during the whole process.
  4. You have to adequately inflate the tires. The tire pressure should be optimum, and there should be the same pressure on every tire of the mower to ensure balance. The optimum pressure amount is written on the tires, and you can fill the tire’s pressure according to that instruction. Use the tire air pressure gauge to measure the tire’s pressure.

How to Level Mower Deck John Deere x300 Step-by-Step Process

Follow these steps to level the mower deck, and these series of steps will help you do so without facing any casualties.

Step-1: Raise The Mower

After following the safety measures, raise the mower deck at 2.75 height position turning the knob under the operator seat.

Step-2: Adjust The Mower Deck Tire

After raising the mower deck, make sure the tires of the mower deck are not touching the ground. If it touches the ground, raise the tires manually.

Step-3: Collect The Mower Gauge

In the middle of the mower adjustment knob there you’ll find the mower gauge. Remove that gauge, and you’ll need this for leveling the deck.

Step-4: Place The Gauge

Now place the mower gauge under the rim of the mower deck, and it should slide off without any obstacle.

Step-5: Adjust The Mower deck

If you see that the gauge is not going smoothly or the mower deck is way above the gauge, the deck needs adjustment.  To adjust the mower deck, insert the air pressure gauge inside the top port opening on the vendor deck until you feel that the end of the gauge touched the adjustment bolts.

To raise the mower deck, turn it clockwise wise, and turn it counterclockwise for lowering it. The deck should lightly touch the mower gauge after adjustment. Do the same for another side to adjust both left and right sides of the mower deck.

Step-6: Front Adjustment

Slide the mower gauge under the front adjustment wheel; if it is not sliding easily or the gap is too big, you need to adjust the mower deck manually using a wrench. Use an 18mm wrench to adjust the mower deck.

For lowering the mower deck, rotate the nut using the wrench counterclockwise and rotate both bolts the same amount. Continue doing it until the bracket slightly rests on the mower gauge.

Here you have it. Now you have successfully leveled the mower deck of your John Deere x300 lawnmower.

Things to do After Leveling the Mower Deck

Wait. You are not done. There are two things that you have to undo that you have done before.

First, lower the mower deck wheels to their original position. That is, it should be placed 1/4inch higher than the ground. The mower deck wheels help cut the grass of uneven ground even;y matching the grass of the other parts of the lawn.

Second, place the mower gauge and exact adjust wrench to the mower adjustment knob where they were initially under the seat.

Frequently Asked Question

How to make the mower deck higher?

For making the sides of the deck higher, insert an exact adjust wrench on the vendor deck and rotate it clockwise, and the mower deck will rise. Now, put the exact adjust wrench into the back opening of the vendor deck and rotate the bolt clockwise. Continue doing it until the deck reaches the desired height.

How to make the mower deck lower?

For making the sides of the deck lower, insert an exact adjust wrench on the vendor deck and rotate it anticlockwise, and the mower deck will low. Now, put the exact adjust wrench into the back opening of the vendor deck and rotate the bolt anticlockwise. Continue doing it until the deck reaches the desired height.

Why is deck-leveling necessary?

Without a properly level mower deck, it is not possible to even cut. It looks terrible and also forms a ridge. So for making the lawn look beautiful, having a leveled mower deck is essential.

Final Words

How to level mower deck John Deere x300 is pretty straightforward and takes very little time to complete. It also needs simple equipment for this process. But the result will make you happy. After leveling the mower deck, you can cut the grass at the even size of your lawn.

With the leveled mower deck you’ll get even size cut grass even on uneven ground. And that is not possible if the mower deck is not leveled. Follow the above-mentioned tips and tricks to easily level the mower deck of your John Deere x300 series lawnmower.

Read Our Most Popular Article :

Leave a Comment